EasyManua.ls Logo

Peak PKC0BJ - User Manual

Peak PKC0BJ
8 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
TM
Sistema de Energía
Portátil 450
TM
No. de Modelo: PKC0BJ
Manual del Propietario
e Información de Garantía
Lea completamente estas instrucciones antes de usar este producto.
Conserve este Manual del Propietario para referencia futura.
P/N XXXXX, 3/09
1
TM
Portable Power System
450
TM
Model No.: PKC0BJ
Owner’s Manual
and Warranty Information
Read these instructions completely before using this product.
Retain this Owner’s Manual for future reference.
P/N XXXXX, 3/09

Table of Contents

Questions and Answers

  • R
    rwilliamsJul 31, 2025
    What to do if my vehicle does not start with the Peak PKC0BJ?
    • J
      James TorresJul 31, 2025
      If your vehicle doesn't start, it might be due to improper cable clamp connections. Rotate the cable clamps back and forth to ensure a solid connection. Alternatively, the vehicle battery charge might be very low, so wait 3 to 4 minutes before attempting to start the vehicle again. It's also possible that the jump-starter has a low battery charge, in which case you should fully recharge the Portable Power System. If none of these steps work, the vehicle battery might be defective and need replacement.
  • D
    Donald BakerAug 16, 2025
    Why is my accessory not working with the Peak PKC0BJ Automobile Battery Charger?
    • Z
      zgonzalezAug 16, 2025
      If an accessory device connected to the 12-volt DC power socket or USB power outlet isn't working, first ensure that the 12V DC Power & USB ON/OFF switch is turned on. A bad connection could also be the problem, so try reinserting the accessory plug into the 12-volt DC power socket. Lastly, the jump-starter might have a low battery charge, so fully recharge the Portable Power System.

Summary

Safety Precautions

Portable Power System Safety

Essential safety guidelines for operating the portable power system unit.

Battery Jump-Starting Safety

Critical safety instructions for jump-starting vehicles with the unit.

First Aid Measures

Operating the Power System

Checking Battery Status

Charging the Portable Power System

Instructions for recharging the unit using AC or DC power sources.

AC Charging Procedure

Steps for charging the unit using a 110/120-volt AC power source.

DC Charging Procedure

Jump-Starting a Vehicle

Guide for jump-starting vehicles using the Portable Power System.

Air Compressor Operation

DC Power Socket Operation

Operating DC Devices

USB Power Outlet Operation

Troubleshooting Common Issues

Product Specifications

Limited Warranty Information

Obtaining Service and Support

Peak PKC0BJ Specifications

General IconGeneral
Battery Voltage6V/12V
MaintainerYes
Automatic ShutoffYes
Output Voltage6V/12V DC
Battery TypeAGM, Gel
Input Voltage120V AC
Protection FeaturesReverse Polarity Protection, Overcharge Protection