-18-
3.1 Format the Micro SD
Before use, make sure that the Micro SD has been inserted into the
device.
1. To format the micro SD, press the button in the live image
2. Use the arrow keys to select the Format Micro SD menu
3. Press the button and confirm the selection with OK to start
formatting the Micro SD
3.2 Short description
Press the button for approx. 2 seconds to switch on
the device.
To change the menu mode, briefly press the button
With the arrow keys and it is possible to choose
between the different modes
By pressing the key, you can access the respective
menus to make further settings
After you have edited the desired value, confirm the new
value with the key. To return to the measurement
screen, press the - button
Press the shutter button to take a picture of the current
screen. To save this picture, press the button
To switch off the device, press the button for approx.
3 seconds
3.3. Record thermal images
1. Turn on the camera
2. In live view, briefly press the trigger to freeze the image
3. Confirm the storage with the key or chancel the
process with the key
To Next Page
Loading...
Need help?
General