Pearl H-1050 User Manual

Hi-Hat Clutch
Felt Washer
Hi-Hat Cup
TractionPlate
w/Traction Grips
Reversible Spiked / Rubber
Tipped Feet
Spring Tension Adjustment Dial
Base
Upper Tube
Upper Pull Rod
Die-Cast Joint
StopLock
Wing Bolt
Adjustment Ring
(for Footboard Angle)
Toe Stopper
Radius Rod
H-1050
Instruction Manual
Congratulations on your purchase!
To get optimum performance of your H-1050 Hi-Hat Stand,
please read this Instruction Manual before playing.
PEARL HI-HAT STAND

Pearl H-1050 Specifications

General

Brand	Pearl
Model	H-1050
Category	Drums
Language	English

Summary

Setup and Assembly

Footboard Attachment

Connects the radius rods to the support casting and secures the base for stability.

Upper Section Assembly

Threads the pull rod, inserts the upper tube, and mounts the hi-hat clutch for cymbal attachment.

Swivel Leg Adjustment

Allows legs to be swiveled for desired position and tripod stability.

Adjustments and Features

Hi-Hat Cup Tilt Adjustment

Tilts the bottom cymbal using a knob to prevent 'air lock' between cymbals.

Traction Grip and Traction Plate Adjustment

Allows custom tailoring of footboard traction by removing or reversing grip dots.

Spring Tension Adjustment

Adjusts spring tension quickly and precisely via a dial for slip-proof performance.

Footboard Angle Adjustment

Adjusts the footboard angle by loosening a key bolt and turning an adjustment ring.

Reversible Spiked / Rubber Tipped Feet

Features reversible feet for slip prevention, with spikes that can be rotated downwards.

Maintenance and Safety

Allen Screw Tightening

Tighten Allen screws with a hexagonal wrench to restore stability if the base tube becomes loose.

Periodic Checks and Lubrication

Check all screws for tightness and lubricate moving parts for optimum performance.

Cleaning the Rubber Mat

Keep the rubber mat beneath the heel plate clean and dust-free using a damp towel for traction.