To Next PageTo Next Page
Need help?Do you have a question about the Pearl PA7TTR and is the answer not in the manual?
Collection of safety and operational symbols with their meanings.
Details the motor's power and physical characteristics.
Describes the air filter as cleanable and reusable.
Explains the high-output water pump for blade cooling.
Describes the rigid reinforced nylon cutting table.
Highlights the built-in ruler for measurements.
Explains the rip guide clamps for front and back.
Describes the durable ABS water tray.
Step-by-step instructions for mounting a new saw blade.
Steps to install and connect the water pump.
How to use the ruler guide on the cutting table for measurements.
Instructions on setting and using the rip guide for cuts.
Procedure for cleaning the water tray after use.
Steps to safely move and store the tile saw.
Guidelines for using wet cutting blades, including do's and don'ts.
Guidelines for using dry cutting blades, including do's and don'ts.
Key safety precautions and practices for operating the tile saw.
Detailed guidance on proper grounding for electrical safety.
Recommendations for selecting and using extension cords safely.
Instructions on using the Ground Fault Circuit Interrupter plug.
Basic rules to follow before performing any maintenance or repair.
Procedures for cleaning the machine after each use.
Steps for maintaining the saw during extended periods of inactivity.
Precautions for operating or storing the saw in cold temperatures.
Steps to clean the water pump after periods of non-use.
Procedure for realigning the guide rails with the blade.
Details of the saw's electrical motor, including HP, Volts, Amps, RPM.
Visual representation of the saw's electrical connections.
List and diagram of parts for the PA-7TTR main assembly.
List and diagram of parts for the motor assembly.
List and diagram of parts for the blade guard assembly.
Diagnosing and fixing noise, cutting, and motor start/stop problems.
Addressing vibration, square cuts, and main table movement issues.
Troubleshooting water flow, low power, and worn blade fit.
Chart recommending specific Pearl abrasive blades for various materials.
Details required for ordering replacement parts, including contact info.
Outlines what the warranty covers and common exclusions.
Details return procedures and company disclaimers.
General
