To Next PageTo Next Page
Need help?Do you have a question about the Pearl RH-2050 and is the answer not in the manual?
General| Brand | Pearl |
|---|---|
| Model | RH-2050 |
| Category | Music Pedal |
| Language | English |
Loosen key bolt on support casting, disengage tab, and remove pedal frame from docking station.
Open legs to form a stable tripod, ensure vertical setting, and tighten key bolt.
Swivel legs to desired position for stability and tighten key bolt.
Adjust feet for maximum slip prevention or floor protection by rotating spike.
Turn knob to tilt bottom cymbal, preventing "air lock" between cymbals.
Adjust drop clutch for open/closed hi-hat transitions; re-tighten Allen screw if needed.
Adjust footboard angle by loosening key bolts on pull cam or cam wheel.
Swap color-coded cams (black, white, blue, red) to change pedal feel and power.
Customize footboard traction by adding/removing grip dots or reversing the plate.
Change pedal feel (Strong, Normal, Light) by moving footboard on heel plate.
Adjust spring tension precisely using the Spring Tension Dial for optimal performance.
Steps to detach the pedal frame from the support casting and docking station.
Keep cable relaxed, avoid sharp bends/twists, and use Spring Tension Dial.
Periodically check screws, lube external parts, and keep rubber mat clean.
