10
Rear Panel
Rotary Speaker Speed/Defeat (1)
A momentary mono footswitch will allow effect defeat (bypass or mute) or rotary speed toggle. The
polarity of the footswitch will be sensed at power-up to allow normally closed or normally open types
without the need for a global parameter (so make sure the footswitch is connected before you power
up).
Audio Outputs (2)
These are Right and Left/Mono line-level outputs. Without a connection to the Right jack, the Left jack
will go into Mono mode. This will sum certain individual effects to mono, but it will not combine the
outputs of a preset with the dual mono configuration.
Audio Inputs (3)
These are Right and Left/Mono line-level inputs. Without a connection to the Right jack, the Left jack
will feed both sides.
Power (4)
Input for the 16 VAC, 1.1 amp power adapter.
NOTE: Use only Peavey part #70900660, which is a DV-1611A.
1
2
3
4
To Next Page
Loading...