EasyManua.ls Logo

Peavey PCX-U302 - Specifications

Peavey PCX-U302
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
SPECIFICATIONS
1. Overall: UHF PCX-U302
1. Carrier Frequency Range: UHF Band 790~960 MHz
2. Oscillation Mode: PLL synthesized
3. Frequency: Pre-programmed 30 switchable frequencies
4. Stability: + 0.005 %
5. Max. Deviation: + 56 KHz with level limiting
6. Dynamic Range: > 119 dB
7. S/N Ratio: > 100 dB
8. T.H.D.: < 0.4 %
9. Squelch: “Superior frequency tracking and muting
techniques” dual-squelch
10. Frequency Response: 60 Hz~18 KHz + 3 dB
2. Receiver: UHF PCX-U302
1. Receiving Method: PLL true diversity single-channel
receiving
2. Sensitivity: 6 dBuV at S/N > 74 dB
3. Image Rejection: > 62 dB
4. Spurious Rejection: > 79 dB
5. Audio Output: can switch between –2 dB/5 K and
-12 dB/600 unbalanced and balanced
6. Power Supply: 12~15 VDC/1 A
7. Panel: 19/2-inch, half-rack size
8. Dimensions (m/m): 210(L) x 175(W) x 44(H)
9. Weight: Approx. 1.0 Kgs
3. Transmitter: UHF PCX-U302
1. Mic Element: Condenser Microphone Capsule
2. Antenna: Built-in
3. RF Output: 10~50 mW (according to regulation)
4. Spurious: < -60 dBc
5. Battery: One 9-Volt Battery
6. Dimensions (m/m): 49 x 234(L)
7. Weight: 250 grams (without battery)
8. 20-hour battery life per single 9-volt alkaline

Related product manuals