Need help?Do you have a question about the Peavey Unity 2002-12 RQ and is the answer not in the manual?
Adjusts input signal level for dynamic range and signal-to-noise ratio.
Shelving EQ for treble frequencies, +/-15 dB at 12 kHz, for noise reduction or brilliance.
Bandpass EQ for midrange frequencies, +/-15 dB at 750 Hz, for tonal shaping.
Shelving EQ for bass frequencies, +/-15 dB at 80 Hz, for depth or clarity.
Controls post-EQ, pre-fader signal level sent to Monitor A mix.
Controls post-EQ, pre-fader signal level sent to Monitor B mix.
Post-fader control for sending channel signal to Effects A.
Post-fader control for sending channel signal to Effects B.
Sets the channel's stereo position in the L-R field.
Warns of signal overload at +19 dBu, indicating gain or EQ reduction is needed.
Controls the channel output level from off to +10 dB gain.
12-segment LED arrays monitoring main L/R and Monitor A/B output levels.
Provides 48 VDC to XLR inputs for condenser microphones; use caution with other devices.
Main power switch for the mixer; power-on LED indicates operation.
Sets output level of effects mix sent to the output jack.
Adjusts levels of stereo return signals added to Monitor A, Monitor B, and L/R mixes.
Sets overall level of the monitor signal sent to the monitor output jack.
Provides signal to stereo tape deck; signal level set by Tape output control.
Receives input from stereo tape deck or CD player.
Sets the level of the L/R signal sent to Tape output jacks.
Adjusts headphone and control room output levels, independent of master faders.
XLR balanced input optimized for microphones; handles up to 21 dBu.
1/4" balanced input for high-level signals, also usable unbalanced.
1/4" balanced inputs for effect returns or additional stereo inputs.
1/4" TRS output for Aux Effect mix, used for external systems or units.
Main mixer outputs adjusted by Left and Right faders.
Output for external monitor system, levels set by channel sends and master faders.
Stereo jack for headphones, level controlled by headphone/control room level control.
Details on adjustable gain ranges for mic, line, and aux return inputs.
Specifies frequency response for mic input to L-R output.
THD values for mic to L-R output across specified frequency ranges.
Details on residual noise and S/N ratio for master outputs under various conditions.
EIN value for the input, measured with termination and frequency bandwidth.
Measures signal isolation between adjacent input channels and L-R outputs.
Describes the function of red LEDs indicating signal levels near clipping.
Description of the 12-segment peak reading meters and their 0 dB reference.
Covers defects in material/workmanship for one year; excludes covers, tubes, etc.
Covers defects in material/workmanship for tubes and meters for ninety days.
Lists conditions that void warranty, including misuse, unauthorized repair, or resale.
Instructions on how to get service, including proof of purchase and dealer contact.
Guidance on completing and mailing the warranty registration card.
To Next Page
General
