Peavey V4X - Page 4

Biamped System: Speakers: SP-1, SP-2, Internationals, Sloped Monitors
Control/Output Usage Typical Setting
40 Hz Rollofi Not used
LF Level Not used =
LF to MF Crossover Sets low system rolloff frequenc: 40 to 100 Hz
ME Level Sets low system level 0 dB (reference
MF-HF Crossover. Sets low to high crossover freq. 500 to 1200 Hz
HF Level Sets high system level -6 to -12 6B
HF EQ Activates high system EQ Switch in
HF-VHF Crossover Sets high system rolloff frequency 12 to 20 kHz
VHF Level Not used
20 kHz Rolloff Not used
LF Output Not used
МЕ Output Connect io low system power amplifier inputs
HF Output. — Connect to high system power amplifier inputs
‘VHF Output Not used
Triamped System: Speakers: Project 2, (FH-1, MB-2, MF1-X)
Typical Setti
Control/Output. Usage
40 Hz Rolloft Activates low system гойо! Switch in
LF Level Sets low system level 0 dB (reference)
LF to MF Crossover Sets low to mid crossover freq 250 Hz
MF Level ‘Sets mid system level OdB
MF-HF Crossover ets mid to high crossover freq. 1200 Hz
HF Level Sets high system level -8 dB
HFEQ ‘Activates high system EQ Switch in
HF-VHF Crossover ‘Sets high system rolloff frequen 36 kHz
[VHF Level — Not used
20 kHz Ноо Not used.
Connect to low system power amplifier inputs.
MF Output Connect to mid system power amplifier inputs
HF Output Connect to high system power amplifier inputs
[VHF Output Not used
Quadamped Syste Speakers: 3020HT with 415 subwoofer
Control/Output
Usage Typical Setting
40 Hz Rollofi Activates low system rolloft Switch in
Level eis law system leval 0 dB (reference)
LF to MF Crossover ets low system to mid cross 80 to 150 Hz
MF Level Sets mid system level 008
MF-HF Crossover ‘Sets mid to high crossover freq. 400t0600Hz — |
HF Level Sets high system level 0dB
HF EG Not used
HF-VHF Crossover ‘Sets high to v-high crossover freq
VHF Level ats very high system lever
Iz Rollatt ictivates v-high system rolloff
1200 10 2200 Hz
008
witch in
TF Output Connect to low system power amplifier inputs
MF Output Connect to mid system power amplifier inputs
HF Output Connect to high system power amplifier inputs
VHF Output Connect to v-high system power amplifier inputs