Peavey Versarray 112 Mk2 User Manual

SPECIFICATIONS Versarray
™
112 Mk2
Frequency Response, 1 meter on-axis, swept-sine in anechoic
environment:
110 Hz to 20 kHz (±3 dB, with processing)
Usable Low Frequency limit (-10 dB point):
85 Hz (with processing)
Power Handling:
Low Frequency Section:
500 W continuous
1,000 W program
2,000 W peak
High Frequency Section:
120 W continuous
240 W program
480 W peak
Sound Pressure Level, 1 Watt, 1 meter in anechoic environment:
Low Frequency Section:
96 dB SPL, (2.83 V input)
High Frequency Section:
101 dB SPL, (4.0 V input for 16 ohm wiring; 2.0 V for 4 ohm
wiring)
Maximum Sound Pressure Level (1 meter) * :
Low Frequency Section:
123 dB SPL continuous
129 dB SPL peak
High Frequency Section:
122 dB SPL continuous
128 dB SPL peak
*Note: This spec is for one module at 1 meter, a line array of
6 units has much higher output at distance due to line source
eect where SPL falls o at 3 dB per distance doubling rather
than 6
dB
Nominal Radiation Angle measured at -6 dB point of polar
response:
90 degrees Horizontal by 15 degrees Vertical
(One module only, straight line array of more than 1 module
narrows vertical dispersion accordingly)
Transducer Complement:
Low Frequency Section:
1x 12 in. Woofer,
1208-8 SPS BWX Black Widow
®
4" VC Woofer, in a sealed box
High Frequency Section:
2x 4.75 in. Ribbon Tweeters
Two RD
™
2.6 Peavey Ribbon Tweeters, on a waveguide
Box Tuning Frequency (Sealed):
Low Frequency Section: 100 Hz
Radiation Angle measured at -6 dB point of polar response:
500 Hz – 1.6 kHz:
Horiz. 120o +/- 55o
Vert. 117o +/- 75o
1.6 kHz - 5 kHz:
Horiz. 84o +/- 20o
Vert. 34o +/- 20o
5 kHz - 16 kHz:
Horiz. 94o +/- 5o
Vert. 15o +/- 3o
Directivity Factor, Q (Mean):
19.78 +19.4, -17.4
Di
rectivity Index, Di (Mean):
11.44 dB +4.5 dB, -7.6 dB

Peavey Versarray 112 Mk2 Specifications

General

Brand	Peavey
Model	Versarray 112 Mk2
Category	Stereo System
Language	English

Summary

Specifications

Frequency Response & SPL

Details swept-sine response and SPL ratings for 1W/1m and maximum levels.

Power Handling & Transducers

Specifies power handling for sections and lists woofer and tweeter components.

Radiation Angle & Directivity

Defines nominal radiation angles and directivity factors for coverage patterns.

System Configuration

Crossover, Impedance & Inputs

Outlines crossover points, slopes, time offset, impedance values, and input connectors.

Enclosure, Dimensions & Weight

Describes cabinet materials, finishes, physical dimensions, and net weight.

Key Features & System Design

Highlights features, system flexibility, and application with accessories.

Performance Characteristics

Harmonic Distortion

Presents harmonic distortion levels at different power inputs versus frequency.

Mounting, Rigging & Safety

Crucial safety instructions for suspending, rigging, and handling the speaker system.

Operational Settings

Wiring, Protection & Settings

Advises on wiring, protection circuits, and details processor settings for EQ, crossover, and delay.

Array and Amplifier Guidelines

Line Array Level Adjustments & Limiters

Guides on adjusting levels for line arrays and specifies limiter settings for processors.

System Integration

Array Splay & Amplifier Loading

Discusses array splay adjustments and safe amplifier load recommendations.

Input Voltages & Power Amp Specs

Lists maximum driver input voltages and peak output voltages for power amps.

Rigging and Hardware

Flying Hardware & Rigging Accessories

Describes available fly bars, pull-back bars, and coupling brackets for array rigging.

Performance Data

Technical Response Graphs

Includes graphs for amplitude response, impedance, beamwidth, and directivity index.

Distortion Data

Harmonic Distortion Graphs

Graphs illustrating harmonic distortion at 1W and 10W power levels.

Connectivity Details

Input Cup Details & Warnings

Explains input cup details, wiring options, jumper settings, and important warnings.

Physical Dimensions

Cabinet Dimensions Diagram

Technical drawings showing the physical dimensions of the Versarray 112 Mk2 cabinet.

Rigging Angle Illustrations

Rigging Angle Diagrams (0-5 Deg)

Visual representation of various rigging angles from 0 to 5 degrees between cabinets.

Array Configuration Angles

Rigging Angle Diagrams (7.5-15 Deg)

Visual representation of various rigging angles from 7.5 to 15 degrees between cabinets.

Fly Bar Diagrams

Cabinet Fly Bar Diagram

Diagram illustrating the connection of the fly bar to the speaker cabinet.

Bracket Diagrams

Coupling & Cabinet Bracket Diagrams

Diagrams detailing the coupling and cabinet brackets used for array rigging.