Peavey VSX 48e

www.peavey.com
VSX™ 26e and VSX™ 48e
Digital Loudspeaker
Processors
Operating
Manual

Peavey VSX 48e Specifications

General

Input Channels	4
Output Channels	8
Dynamic Range	>110 dB, A-weighted
Crossover Filters	Butterworth, Linkwitz-Riley, Bessel
Signal to Noise Ratio	>110 dB, A-weighted
Analog Inputs	4 x XLR
Analog Outputs	8 x XLR
Frequency Response	20 Hz - 20 kHz, ±0.5 dB
Crossover Slopes	12, 18, 24, 48 dB/Octave
Dimensions	483 x 44 x 216 mm
Control Interface	USB
Power Supply	50-60 Hz

Summary

Front Panel Controls - Part 1

Editing and Parameter Controls

Process function buttons and parameter knob for editing input/output parameters.

Front Panel Controls - Part 2 & Rear Panel Connectivity

Rear Panel Power and Network Ports

AC power input and Ethernet port for control.

Operation and Setup

Unit Power and Interface Ports

Explains power connection, switch, Ethernet, and serial ports.

Global Functions - Part 1

Device ID and IP Address Settings

Global Functions - Part 2

Preset Management Features

InputOutput Parameters - Part 1

Gain Adjustment

Parametric Equalization (PEQ)

Configuring 8-band input and 9-band output PEQ with various filter types.

InputOutput Parameters - Part 2

Crossover Filters

Configuring high-pass and low-pass filters with selectable alignments and slopes.

InputOutput Parameters - Part 3

Matrix Routing and Polarity

CompressorLimiter Settings

Adjusting compressor parameters like Threshold, Ratio, Attack, and Release.

VSX Editor Program - Introduction

Editor Connection and Setup

Connecting the VSX via USB/Ethernet and initial IP/ID configuration.

Editor Interface Basics

VSX Editor - Input EQ

Input Equalization Editing

Adjusting input EQ parameters using graph and table controls.

VSX Editor - Output EQ

Output Equalization Editing

Adjusting output EQ parameters using graph and table controls.