Pedal Valves PEDALWORKS PVI-21 User Manual

Owners Manual
PEDALWORKS
TM
FAUCET
CONTROLLER
Model PVI-21
3 Year Limited Warranty
Pedal Valve Inc. will repair or replace units with defects
in materials or workmanship for a period of three years
from date of purchase. Return unit to factory at the
address below, freight pre-paid, and your unit will be
repaired and shipped back at no charge.
Problems due to mineral deposits from your water,
or damage to the finish are not covered by this
warranty, but will be repaired at a nominal charge.
You can obtain 2-3/8” compression union from a
hardware store and connect the hoses together if ever
you need to have the unit out for repair.
Include name, daytime phone #, dated proof of
purchase for warranty repairs, and return address
when shipping unit to factory.
For Warranty Service or Repairs, Ship To:
Pedal Valves Inc.
13625 River Road
Luling, LA 70070
Tech Support 985-785-0594
Fax 985-785-0082
E-mail pvi@pedalvalve.com
www.pedalvalve.com
Page 12

Pedal Valves PEDALWORKS PVI-21 Specifications

General

Category	Plumbing Product
Model	PVI-21
Type	Pedal Valve
Operation	Foot Pedal
Connection Size	1/2 inch

Summary

3 Year Limited Warranty

Trouble Shooting and Service

Installation Problems

Troubleshooting initial installation issues, often related to incorrect hose connections.

Faucet Trickles or Drips

Unscrew cartridge and look for sand or debris holding cartridge open.

Pedal Not Latching or Unlatching

Check for interference with the floor or cabinet. Reposition unit if needed.

Post-Installation Problems

Installation Steps for PEDALWORKSTM

Mounting the Unit

Marking Hole Locations

Drilling Mounting Holes

Drilling Pedal Hole

Operating Instructions

Basic Operation

Step on pedal to activate flow; push latch button to hold pedal open for constant flow.

Latch Button Function

Push with foot to latch pedal open for continuous flow; step again to release.

Disabling Pedal Use

To disable pedal operation, close the faucet handles.

Connecting the Lines

Flex Line Tightening

Supply Stop Connections

PEDALWORKS Connections

Faucet Connections

Finalizing Installation

Testing and Leak Check

System Test

Open valves, test pedal operation, and check for leaks. Snug fittings as needed.

Bracket Adjustment