ã
á
Accessories
19• B
elted Base: approved for children weighing 0-13 kg
(0-12/14 months), used with car seats in Group 0+. It is
installed using the vehicle's seat belt (Fig. a).
• Isofix Base 0+1 K: approved for children weighing 0-18
kg (0-4 years approx.), used with car seats in Group 0+
and then Group 1 (Fig. b).
It fastens to the vehicle's Isofix attachments without
using the seat belt.
20• Travel Bag Car Seat: practical travel bag that keeps
the car seat clean and protected (it can also contain the
bases) (Fig. c).
• Clima Cover Primo Viaggio SL: washable cover in
Tencel, a natural heat-regulating fiber that regulates
body moisture (warm in winter and cool in summer)
(Fig. d).
21• Igloo Cover Primo Viaggio SL: sleeping bag for the
Primo Viaggio SL car seat (Fig. e).
• Rain Cover Primo Viaggio SL: rain cover for the Primo
Viaggio SL car seat (Fig. f ).
Serial numbers
22• A label on the front lateral side, under the fabric,
contains
the following information: product name,
production date and serial number (Fig. a).
• The type approval label can be found on the rear of the
backrest, at the top (Fig. b).
• Harness production date (Fig. c).
In the event of problems with the product, these
details will be of use to customers.
Product cleaning
• This product requires minimal maintenance. Cleaning
and
maintenance must only be carried out by adults.
• It is advisable to keep all the moving parts clean.
• Clean the plastic parts periodically with a damp cloth.
Do not use solvents or similar substances.
• Brush the fabric parts to remove dust.
• Do not clean the polystyrene shock absorbing device
with solvents or other similar products.
• Protect the product from atmospheric agents: humidity,
rain or snow. Extended exposure to sunshine can cause
colour changes in many materials.
• Store the product in a dry environment.
How to read the type approval label
This paragraph explains how to interpret the type
approval
label (orange label).
• The label is double because this car seat is type
approved for two types of installation in vehicles:
• With static or inertia-reel three-point seatbelts (the term
UNIVERSAL indicates compatibility of the car seat with
vehicles fitted with this type of seatbelt);
• ISOFIX attachment systems (the term SEMI-UNIVERSAL
class E indicates compatibility of the car seat with
vehicles fitted with this system).
• The top of the label displays the trademark of the
manufacturing company and the name of the product.
• The letter E in a circle indicates the European type
approval mark and the number indicates the country
that issued the type approval (1: Germany, 2: France, 3:
Italy, 4: The Netherlands, 11: Great Britain, and 24: Ireland).
To Next Page
Loading...
Need help?
General
