EasyManuals Logo

Peg-Perego Viaggio 2-3 Shuttle User Manual

Peg-Perego Viaggio 2-3 Shuttle
Go to English
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
21
• Never remove your child from the seat
when the vehicle is moving.
• Check that the car seat is not blocked
by a moving part of the seat or a door.
• Adjust the height and tension of the
belts, checking that they adhere to the
child’s body without being too tight.
Check that the seat belt is not twisted
and the child cannot unfasten it.
• Do not use the car seat without
the lining. This lining cannot be
replaced by other lining that has not
been specifically approved by the
manufacturer because it is an integral
part of the seat and is essential for
safety purposes.
• Do not remove or replace the white
part in polystyrene under the seat, as it
is essential for safety purposes.
• If in doubt, contact the manufacturer
or retailer of this car seat.
This article is progressively numbered
through its certification label, located
on the bottom of the seat (fig. 24).
• Do not remove the adhesive and sewn
labels. Removal of these labels could
result in the product not complying
with the law.
• Do not use the car seat if it is broken or
if there are missing parts, if it is second-
hand, or if it has been subjected to
heavy impacts as a result of accidents,
as it may present hidden yet dangerous
structural damage.
• Do not alter the product.
• Contact the post-sales service for
repairs, the replacement of components
and information on the product;
contact information is provided on the
last page of this manual.
When not in use, the car seat can be
left in the vehicle provided it is attached
to the vehicle's Isofix attachments;
otherwise, remove it from the vehicle:
in the event of an accident it could be
dangerous for other passengers.
• Do not use the car seat if more than
12 years have elapsed from the date
on the body (fig. 24); the natural ageing
of the materials may mean the car
seat no longer complies with the laws
on safety.
• Do not use accessories that have not
been approved by the manufacturer or
competent authorities.
1_ IMPORTANT
• "Viaggio 2-3 Shuttle": this car seat,
Group 2-3, must be installed in the
direction of travel.
• Do not install Viaggio 2-3 Shuttle
on seats that are not in the direction
of travel or are transversal to the
direction of travel.
• It is always advisable to fit the car
seat on the rear vehicle seat and on
the passengers side.
• If the car seat is installed on
the front seat, it is advisable to
place it as far as possible from the
dashboard.
Product components
2. Inspect the content of the package
and contact the post sale Customer
Care if some items are missing.
_The car seat includes:
seat with armrests (a) and adjustable

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Peg-Perego Viaggio 2-3 Shuttle and is the answer not in the manual?

Peg-Perego Viaggio 2-3 Shuttle Specifications

General IconGeneral
Safety StandardsFMVSS 213
Cup HoldersYes
Fabric TypePolyester
Materialplastic
Warranty2 years
Weight Range33 to 120 lbs

Related product manuals