Peg-Perego Viaggio Shuttle Plus 20 User Manual

USA
EN Instructions for use
FIUS1801I262
WARNING:
Weight range:
40 – 120 lbs
(18 – 54 kg)
Height range:
39 - 63 inches
(99 – 160 cm)
Age:
at least 4 years old
(highback mode)
at least 5 years old
(backless mode)
• Do not install or use this
booster seat until you
read and understand all
the instructions in this
manual and the labels.
To avoid serious injuries
to your child, follow the
instructions carefully. Keep
the instruction manual
in the dedicated pocket
for future reference.

Peg-Perego Viaggio Shuttle Plus 20 Specifications

General

Brand	Peg-Perego
Model	Viaggio Shuttle Plus 20
Category	Car Seat
Language	English

Summary

INTRODUCTION

SAFE PRACTICES

INFORMATION & WARNINGS

Certification

Booster seat meets Federal Motor Vehicle Safety Standard 213, not certified for aircraft.

Expiration

Do not use if over 12 years old; check manufacture date sticker.

In case of a crash

Guidelines for continued use after a minor crash; contact customer service.

REGISTRATION AND RECALL

WHEN IS A CHILD READY TO TRANSITION TO A BOOSTER SEAT?

WHEN IS A CHILD READY TO RIDE WITHOUT THIS BOOSTER SEAT?

SEAT BELTS - WHICH ONES ARE SAFE TO USE WITH THIS BOOSTER SEAT?

VEHICLES AND VEHICLE SEATS - WHICH ONES ARE SAFE TO USE WITH THIS BOOSTER SEAT?

LATCH - WHAT IS IT AND WHERE IS IT IN THE VEHICLE?

Vehicle LATCH hardware

Describes lower and tether anchors in vehicles.

Child Seat LATCH hardware

Describes lower anchor connectors: flexible and rigid LATCH.

RIGID LATCH - WHY TO USE IT?

MODES OF USE: HIGHBACK AND BACKLESS

Highback mode

Offers best protection with headrest/backrest for side impact, enclosure, and posture.

Backless mode

Backless mode requires vehicle support for child's ears; use highback if not.

HIGHBACK MODE: ADJUSTING THE SEAT TO FIT YOUR CHILD

Headrest height

Adjusts headrest height in 5 positions; guides should be at/above shoulders.

Backrest height

Adjusts backrest height in 3 positions; ensure secure click.

Backrest width

Adjusts backrest width in 3 settings; use knob to widen or narrow.

HIGHBACK MODE: INSTALLING THE BOOSTER SEAT IN THE VEHICLE

HIGHBACK MODE: SECURING THIS BOOSTER WITH RIGID LATCH

HIGHBACK MODE: BUCKLING YOUR CHILD IN THE BOOSTER

CONVERTING FROM HIGHBACK TO BACKLESS MODE

BACKLESS MODE: INSTALLING THE BACKLESS BOOSTER SEAT IN THE VEHICLE

BACKLESS MODE: SECURING THIS BOOSTER WITH RIGID LATCH IN THE VEHICLE

BACKLESS MODE: BUCKLING YOUR CHILD IN THE BOOSTER

WHEN AND HOW TO USE THE SHOULDER BELT POSITIONING CLIP

CUP HOLDER

CLEANING AND MAINTENANCE

Cleaning the Plastic & Metal Parts

Use damp cloth for plastic, dry for connectors. Avoid chemicals.

Cleaning the Fabric

Machine wash covers at 87°F (30°C), hang dry. No dryer, iron, bleach, or dry clean.

Replacement Parts

Declaration of conformity