25
Find the lower anchors in
your vehicle (see "LATCH -
What is it and where is it in
the vehicle?" - see page 16)
1. Squeeze the yellow
handle (a) at the front of
the booster. Both yellow
rigid LATCH connectors
will pop out (b) at the same
time. Squeeze the yellow
handle once more to make
sure both connectors
popped out all the way .
2. Align the yellow rigid
LATCH connectors with
the lower anchors in
the vehicle’s seat crease.
Connect by pushing the
booster towards the back
of the vehicle seat.
click
HIGHBACK MODE:
SECURING THIS BOOSTER WITH RIGID LATCH
To Next Page
Loading...
Need help?
General
