24
Please read “Rigid LATCH: Why to Use It” (see page 18).
If you choose not to use the rigid LATCH:
- Skip to “Highback Mode: Buckling your Child in the
Booster” (see page 29).
IMPORTANT: because your booster is not secured
to the vehicle it can become a projectile when the
child is not in it. Therefore, make sure you buckle
the booster when it is empty so it does not become
a projectile.
If you choose to use the rigid LATCH, follow the
instructions below.
HIGHBACK MODE:
INSTALLING THE BOOSTER SEAT IN THE VEHICLE
To Next Page
Loading...
