Do you have a question about the Peg-Perego PRIMO VIAGGIO 4-35 and is the answer not in the manual?
Height Capacity | Up to 32 inches |
---|---|
Harness | 5-point harness |
Care and Cleaning | Machine washable seat pad |
Type | Infant car seat |
Base Included | Yes |
Weight Capacity | 4 to 35 lbs |
Installation Type | LATCH or Vehicle Seat Belt |
Safety Features | Side impact protection, energy-absorbing foam |
Product Weight | 9.5 lbs (without base) |
Stroller Compatibility | Compatible with Peg-Perego strollers |
Safety Standards | FMVSS 213 |
Additional Features | Dual stage cushion system |
Material | Polyester |
Contact for repairs, spare parts, and product information.
Register for recall notifications and product updates.
Crucial warnings on seat usage, installation, and child safety.
Rules on child safety, seat condition, and proper belt installation.
Weight, height, age limits, and usage restrictions.
Components and function of the 5-point harness.
Identification of car seat parts from front, back, and internal features.
Overview of the car seat base components.
Shows compatibility with various chassis and strollers.
Location of product identity and serial numbers for reference.
Instructions for initial assembly, including the anti-rebound bar.
General guidance on installing the car seat with or without the base.
Explanation of the Universal Anchorage System (UAS) and anchor symbol.
Explanation of seat belt components and retractor types (ELR, SLR, ALR).
Details on latch plate types and ALR mode activation.
Guidance for lap/shoulder belts with various retractors and latch plates.
Warnings against using specific seat belts, like 2-point ELR lap belts.
Warnings about incompatible seat belt designs and seating positions.
Two methods for installing the base: UAS system or vehicle seat belt.
How to detach the seat and adjust the base for proper leveling.
Step-by-step guide to install the base using UAS connectors.
Procedure for installing the base using vehicle seat belts.
Information on installing the base with various lap belt types.
How to secure the car seat onto the installed base.
Instructions for installing the seat directly into the vehicle.
Guide on when and how to use a locking clip for installation.
Step-by-step guide to secure the baby with the 5-point harness.
How to raise or lower the shoulder straps for proper fit.
Explanation of the dual cushion system for infant support.
How to use the seat as an infant carrier, including handle functions.
Attaching, opening, and removing the protective hood.
Instructions for securing the seat on aircraft.
General cleaning, padding maintenance, and product protection advice.
Steps to remove the seat cover and padding for washing.
Steps to reassemble the seat cover and padding after washing.
List of available spare parts for the car seat.