To Next PageTo Next Page
Need help?Do you have a question about the Peg-Perego Primo viaggio SL and is the answer not in the manual?
General| Mounting type | ISOFIX |
|---|---|
| Product color | Cappuccino |
| Car seat group | 0+/1 (0 - 18 kg; 0 - 4 years) |
| Side protection | Yes |
| Belt fastening type | 3-point |
Weight and Dimensions| Depth | 650 mm |
|---|---|
| Width | 430 mm |
| Height | 600 mm |
| Weight | 3800 g |
Car seat is type approved under ECE R44/04 for children 0-13 kg, subjected to safety tests.
Must be installed rearward-facing on seats without airbags. Do not install on seats with airbags.
Do not use when child can sit unaided. Not for prolonged sleep. Dangerous on elevated surfaces.
Use Ganciomatic System to attach/detach from bases or strollers. Ensure it clicks into place.
Engage harness by inserting tongues into buckle. Release by pressing red button.
Slacken harness by pressing button and pulling straps. Tighten by pulling central adjustment strap.
Adjust headrest and harness simultaneously to 5 heights. Ensure straps are just below shoulders.
The hood must not be used to lift the car seat as it may detach.
Lower handlebar to position A. Route seatbelt through guides and buckle. Ensure taut.
Pass seatbelt behind backrest into rear guides. Tighten seatbelt.
Remove hood, booster cushion, shoulder pads, straps, and headrest cover in sequence.
Be careful not to break the white polystyrene (EPS) parts during cover removal.
The straps must not be twisted when reassembling the cover.
