44
To properly use the
shoulder belt positioning
clip follow the instructions
below.
1. The shoulder belt
positioning clip is stored
under the fabric cover of
the seat. Lift the cover (1)
and pull the red clip out
(2). Next, pass the red clip
through the handle (3).
2. Pull the strap out from
under the booster seat.
Make the strap as long as
possible. Push the button
at the back of the booster
seat that is hidden by the
strap (1) and at the same
time pull the strap up as far
as it goes (2).
WHEN AND HOW TO USE
THE SHOULDER BELT POSITIONING CLIP
1
2
3
To Next Page
Loading...
