Pego PLUS 100 AB - Page 12

PLUS 100 AB
Page 12
Rev. 01-08
MANUALE D’USO E MANUTENZIONE
LCD DISPLAY
1. Ambient temperature / parameters (for values greater than +45°C the word HOT is
displayed).
2. Evaporator temperature / product sensor temperature / day of current month (see
setting on parameter tEu on 1
st
level programming) / parameters (during
programming) (for values greater than +45°C the word HOT is displayed)
3. Time / date / time parameter values
4. Programming (control is in programming mode)
5. Cold (compressor call indicator)
6. Defrost
7. Fans (flashing during fan stop – parameter F5)
8. Light
9. Alarm
10. Stand-by (flashing in stand-by. Outputs deactivated.)
CHAP. 5 – Parameter programming
5.3
n
p
q
r
s
o
t
u
v
w