Need help?Do you have a question about the Pego ECP200 BASE Series and is the answer not in the manual?
General| Brand | Pego |
|---|---|
| Model | ECP200 BASE Series |
| Category | Controller |
| Language | English |
Overview of the ECP200 BASE series controllers and their applications.
Lists and describes the different ECP200 BASE product codes and their functionalities.
Displays the physical dimensions of the ECP200 BASE unit.
Details the information found on the unit's identification plate.
Crucial guidelines for installers regarding safe and correct installation procedures.
Lists the items included in the standard assembly kit for the ECP200 BASE unit.
Step-by-step instructions for physically mounting and connecting the ECP200 BASE controller.
Outlines the various control and operational functions managed by the ECP200 BASE controller.
Provides detailed technical specifications, including power, sensors, and output capabilities.
Explains the warranty coverage and conditions for the ECP200 BASE series.
Overview of the ECP200 BASE controller's primary control interface.
Details the function of each button on the ECP200 BASE controller's front keypad.
Explains the meaning and display of various LEDs on the ECP200 BASE controller.
Introduces the two-level programming structure for safety and ease of use.
Defines the symbols used in conjunction with the controller's keys.
Instructions on how to view and modify temperature set points.
Guide to accessing and modifying user-configurable parameters.
Comprehensive list of Level 1 parameters, their meanings, values, and defaults.
Guide for accessing and modifying installer-specific configuration parameters.
Comprehensive list of Level 2 parameters, their meanings, values, and defaults.
Procedure for powering up the ECP200 BASE controller after installation.
Explains the conditions triggering compressor operation and shutdown.
Instructions on how to initiate a manual defrost cycle using the controller.
Details on configuring and using the hot gas defrosting method.
Explanation of the pump down function and its setup for specific systems.
Information on password protection and accessing different programming levels.
Information on connecting the ECP200 BASE to the TeleNET monitoring system.
Configuration steps for setting up alarm relay and TeleNET switching modes.
Guide to identifying and resolving common alarm codes and system issues.
Official CE conformity declaration for the ECP200 BASE series products.
Visual representation of the wiring connections for the ECP200 BASE4 model.
Visual representation of the wiring connections for the ECP200 BASE4A model.
Visual representation of the wiring connections for the ECP200 BASE2 model.
Visual representation of the wiring connections for the ECP200 BASE2A model.
Example wiring for direct control of functions with BASE4/BASE4A.
Example wiring for mixed control of BASE4/BASE4A with condensing unit.
Example wiring for direct control of functions with BASE2/BASE2A.
Example wiring for mixed control of BASE2/BASE2A with room power board.
Wiring diagram for establishing a TeleNET network connection.
Details on the SCHINT230 optional kit and its capabilities.
Wiring diagram illustrating the connections for the SCHINT230 optional kit.
To Next Page
