ECP200 BASE 2/4
Page 8
USE AND MAINTENANCE MANUAL
Rev. 01-09
ECP200 BASE PANEL FUNCTIONS
- Display and adjustment of cold room temperature accurate to 0.1 °C.
- Display of evaporator temperature from parameter
- System control activation/deactivation
- System warnings (probe/sensor errors, minimum and maximum temperature warnings,
compressor shutdown)
- Evaporator fans control
- Automatic and manual defrost (static, heating element, cycle inversion)
- Direct control of compressor unit up to 2 HP
- Room light, via panel key or door switch
- Alarms/auxiliary relay
CHAP. 3 - Functions
CHAPTER 3: FUNCTIONS
To Next Page
Loading...
