Pego ECP200 BASE Series - ECP200 BASE Parameter Programming; ECP200 BASE Control Panel Interface; ECP200 BASE Frontal Keypad Functions

ECP200 BASE 2/4
Page 11
USE AND MAINTENANCE MANUAL
Rev. 01-09
CONTROL PANEL
FRONT KEYPAD
1.
key: AUXILIARY RELAY CONTROL (on the version with alarm relay
controls the relay manual if parameter AU=1)
2.
key: UP / MUTE WARNING BUZZER
3. key: STAND BY (if the system shuts down the LED flashes)
4.
key: room temperature SETTING
5. key: DOWN / MANUAL DEFROST
6. key: ROOM LIGHT
CHAP. 5 – Parameter programming
CHAPTER 5: PARAMETER PROGRAMMING
5.1
n
p
q
r
s
o
5.2