Pego ECP200 BASE Series User Manual

ECP200 BASE 2/4
Page 14
USE AND MAINTENANCE MANUAL
Rev. 01-09
LEVEL 1 PROGRAMMING (User level)
To gain access to the Level 1 configuration menu proceed as follows:
1. Press the (t) and (u) keys simultaneously and keep them pressed for a few seconds
until the first programming variable appears on the display.
2. Release the (t) and (u) keys.
3. Select the variable to be modified using the (t) or (u) key.
4. When the variable has been selected it is possible:
• to display the setting by pressing SET key
• to modify the setting by pressing the SET key together with the (t) or (u) key.
When configuration values have been set you can exit the menu by pressing the (t) and
(u) keys simultaneously for a few seconds until the cold room temperature reappears.
5. The new settings are saved automatically when you exit the configuration menu.
CHAP. 5 - Programmazione dati
5.7

Pego ECP200 BASE Series Specifications

General

Brand	Pego
Model	ECP200 BASE Series
Category	Controller
Language	English