Pego PLUS 100 AB User Manual

PLUS 100 AB
Page 3
Rev. 01-08 MANUALE D’USO E MANUTENZIONE
INTRODUCTION
Page 4 1.1 General
Page 4 1.2 Product ID codes
Page 5 1.3 Overall dimensions
Page 5 1.4 Identification data
INSTALLATION
Page 6 2.1 Important information for installer
Page 6 2.2 Standard assembly and use kit
FUNCTIONS
Page 7 3.1 Functions managed by the Plus 100 AB
TECHNICAL CHARACTERISTICS
Page 8 4.1. Technical characteristics
Page 9 4.2 Warranty terms
PARAMETER PROGRAMMING
Page 10 5.1 LCD areas
Page 11 5.2 Control panel
Page 12 5.3 LCD display
Page 13 5.4 General features
Page 13 5.5 Key to symbols
Page 13 5.6 Setting and displaying the set-points
Page 14 5.7 Programming the type of work
Page 18 5.8 Level 1 programming
Page 19 5.9 List of Level 1 variables
Page 20 5.10 Level 2 programming
Page 21 5.11 List of Level 2 variables
Page 23 5.12 Switching on the PLUS 100 electronic controller
Page 23 5.13 Compressor activation/deactivation conditions
Page 23 5.14 Cooling cycle activation/deactivation conditions
Page 24 5.15 Manual defrost
Page 24 5.16 Hot gas defrost
Page 24 5.17 Modifying date and time
TROUBLESHOOTING
Page 21 6.1 Troubleshooting guide
ALEGATI / APPENDICES
Page 23 A.1 EC declaration of conformity
Page 24 A.2 PLUS 100 AB connections diagram
CONTENTS
CHAP. 1
CHAP. 2
CHAP. 5
CHAP. 6
CHAP. 3
CHAP. 4

Pego PLUS 100 AB Specifications

General

Brand	Pego
Model	PLUS 100 AB
Category	Controller
Language	English