Pego PLUS 100 AB User Manual

PLUS 100 AB
Page 8
Rev. 01-08
MANUALE D’USO E MANUTENZIONE
TECHNICAL CHARACTERISTICS
Power supply
Voltage
230 V~ ± 10% 50Hz
MAX power absorption ~ 7 VA
Climatic conditions
Working temperature -10 - 60°C
Storage temperature -30 - 70°C
Relative humidity Below RH 90%
General characteristics
Type of sensors that can be connected NTC 10K 1%
Resolution 1°C
Sensor read precision ± 0.5°C
Read range -45…+45
PLUS100 AB - Output characteristics - max applicable load (230 V AC)
Compressor (non-powered contact) 1500 W (AC3)
Elements (non-powered contact) 1500 W (AC1)
Fans (non-powered contact) 500 W (AC3)
Room light (non-powered contact) 800 W (AC1)
Alarm contact (non-powered contact) 800 W (AC1)
Dimensional characteristics
Dimensions 19.3 cm x 7.9 cm x 20.3 cm (HxDxL)
Insulation / mechanical characteristics
Box protection rating IP 65
Box material ABS self-extinguishing
Type of insulation Class II
CHAP. 4 – Technical characteristics
CHAPTER 4: TECHNICAL CHARACTERISTICS
4.1

Pego PLUS 100 AB Specifications

General

Brand	Pego
Model	PLUS 100 AB
Category	Controller
Language	English