EasyManuals Logo

Pego TOTALINE Man in cold room alarm User Manual

Pego TOTALINE Man in cold room alarm
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
TTLAPE03
Pag.14
Rev. 2-09
MAN IN COLD ROOM ALARM KIT COMPONENTS
THE MAN IN COLD ROOM ALARM KIT consists of:
- Visual/acoustic alarm control unit complete with buffer battery.
- N° 3 seals, to be inserted between fixing screw and box backing.
- Emergency cold room light switch.
- Use and maintenance manual.
PRODUCT IDENTIFICATION CODE
TTLAPE03 kit complete with luminous/acoustic man in
cold room emergency alarm.
. TECHNICAL CHARACTERISTICS
Mains power supply 230 V AC 50 Hz
Max consumption on mains power 20 mA
Buffer battery 12 V DC Ni-MH 1300 mAh
Complete recharge time: 110 h
Operating autonomy - With 230 V AC NOT ON
(running on charged buffer battery) : 14 h approx.
- With 230 V AC power ON: unlimited
Out-of-room module IP 43 protection rating
Operating temperature: -5 - +45 °C
Acoustic characteristics
Type: piezoelectric
Sound power: 90 dB at 1m
Visual warning Flashing red LED, 12 V DC
In-room emergency pushbutton Lighting: red LED, 12 V DC
NC contact
Keypad with IP65 protection rating
Operating temperature: -25 - +70 °C
Auxiliary relay 8A AC1 (contact closes with alarm on)
1.1
1.2
1.3
- ENG -
USE AND MAINTENANCE MANUAL
CHAPTER 1: INTRODUCTION
CHAP. 1 - Introduction

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pego TOTALINE Man in cold room alarm and is the answer not in the manual?

Pego TOTALINE Man in cold room alarm Specifications

General IconGeneral
BrandPego
ModelTOTALINE Man in cold room alarm
CategorySecurity System
LanguageEnglish