Need help?Do you have a question about the pei-POINT AS25-13K and is the answer not in the manual?
Details on the manufacturer and identification specifics of the welding machine.
Critical safety warnings to prevent accidents, injuries, and equipment damage.
User-specific safety precautions and required personal protective equipment.
Specifies the required environmental conditions for machine operation and installation.
Details the electrical and pneumatic energy specifications needed for the machine.
Instructions for safely connecting the welding machine to electrical and pneumatic sources.
Overview of the welding machine's various functions and controls.
Step-by-step guide for the initial setup and startup procedure.
Explains the welding cycle phases and necessary preparation steps before welding.
Details how welding parameters affect the quality and outcome of the weld.
Methods and tests to verify the quality and strength of the welded spots.
General instructions for the normal operation of the welding equipment.
Specific operating instructions tailored for autobody repair applications.
Best practices and recommendations for performing welding with a single-sided gun.
Procedures and guidance for dent pulling operations using the single-sided gun.
Detailed explanation of the features and operation of the welding control unit.
Identifies common welding defects, their causes, and recommended remedies.
General information and requirements for maintenance personnel and procedures.
Provides a structured guide for performing routine and periodic maintenance tasks.
To Next Page
General