Peiying PY0015 - Page 16

Owner’s manual
16
EN
3. Camera Button/Playback Button
Function 1: Photo Taking
To enter photographic mode, shortly press the camera button
under standby. Press the same button to take photos.
Function 2: Playback
To enter playback mode, press the camera button for 3 seconds.
Press the page up/down to select images and videos, press
camera button again to play the selected video. To exit playback
mode, press the camera button for 3 seconds.
Function 3: Play/Pause
Under playback mode, press the camera button to play/pause a
video.
4. Emergence Video Lock Button
Function 1: Video Locking
If car collided during recording, shortly press the emergence
button to protect valuable video evidence. Previous footage will
be saved and extended for extra 3 minutes recording. To unlock
video by shortly press the emergence button again.
*This video will not be overwriting during loop recording.
Function 2: Movement Detection On/Off
To switch on movement detection, press the emergence button
under standby for 3 second. Press it again for 3 second for turn-
ing off the movement detection.
Function 3: Conrmation
Emergence button functioned as conrm/ok button under menu
interface.
Function 4: Switch of Cameras
At the bottom of the display, that shows sign of a camera while
external camera has been connected. Switches display of front
camera, external camera and picture in picture by shortly press
emergence video lock button