20
287730
BEFORE USING THE APPLIANCE FOR THE FIRST
TIME
(FOR MODEL WITH STEAM GENERATOR)
If you select one of the steam programs as the first program to be run with your dryer,
first add distilled water to the steam generator tank; the dryer needs the distilled water to
generate steam.
If the steam generator tank is empty, none of the steam programs will be available.
"LO" (steam generator tank empty) will appear on the display. Later, the system is
automatically filled with condensed water accumulated during the drying process.
Only use distilled water. Do not use regular tap water or any
additives. Limescale may damage the heater. Malfunction or
failure due to accumulation of limescale is not covered by the
warranty.
Add distilled water when the appliance is switched on and one
of the steam programs is selected (but before starting any
drying program). Otherwise, the level sensor will not operate
and water may overflow to the dryer interior.
To Next Page