Pelham PELW02G User Manual

1
Talking Watch
Instruction Manual
IMPORTANT
When you first receive the watch it will be in sleep mode – You must hold
button S1 For 5 seconds to activate the watch voice
There is also a sleeper tag under the crown (winder) this must be removed
and the crown pushed in to start the hands operating.
Watch sleep mode. This switches off the voice
Hold S1 for 5 seconds to activate the watch from sleep mode.
Hold S1 for 5 seconds to enter sleep mode.
The hands and voice are set seperately
To set current time on the dial, pull out the crown (winder) and set hour
and minute hands to desired time. Then push back the crown to normal
position.
Time and Date Annoucement
Press S1 once, to hear time
Press S1 twice, to hear date
Setting functions:
Set hour
Press S2 to set hour, then press S1 to adjust to the hour.
Set minute
Press S2 again to set minute, then press S1 to adjust to the minute.
Set year
Press S2 again to set year, then press S1 to adjust to the year.

Pelham PELW02G Specifications

General

Brand	Pelham
Model	PELW02G
Category	Watch
Language	English

Summary

Watch Sleep Mode

Activating and Entering Sleep Mode

Hold S1 for 5 seconds to activate from sleep and to enter sleep mode.

Setting Time and Voice

Setting the Analog Time

Pull out the crown to set hour and minute hands, then push back to normal position.

Time and Date Announcement

Press S1 once for time, press S1 twice for date.

Setting Functions

Set Hour

Press S2 to select hour, then S1 to adjust the hour.

Set Minute

Press S2 to select minute, then S1 to adjust the minute.

Set Year

Press S2 to select year, then S1 to adjust the year.

Set Month

Press S2 to select month, then S1 to adjust the month.

Set Date

Press S2 to select date, then S1 to adjust the date.

Set Alarm Hour

Press S2 to select alarm hour, then S1 to adjust the hour.

Set Alarm Minute

Press S2 to select alarm minute, then S1 to adjust the minute.

Set Alarm

Press S2 to select alarm, then S1 to adjust alarm on/off.

Set Chime

Press S2 to select chime, then S1 to adjust chime on/off.