Pelican GW400 User Manual

Pelican
Wireless
Systems
Serial No:
XXX-XXXX
Serial No:
XXX-XXXX
SERIAL NO:
Start by installing a Pelican Wireless Extended
Range Gateway (GW400).
Write down the GW400’s Serial Number
which is found on the side of the device.
GW400
STEP ONE: INSTALL GATEWAY
STEPS TOWARDS YOUR NEW PELICAN
WEB APP
Geng Started
1
1

Pelican GW400 Specifications

General

Brand	Pelican
Model	GW400
Category	Gateway
Language	English

Summary

Install Pelican Gateway

STEP ONE: INSTALL GATEWAY

Install the Pelican Wireless Extended Range Gateway (GW400) and record its serial number found on the device.

Network Requirements

NETWORK REQUIREMENTS

Details the TCP/IP connection, required ports (UDP/514, TCP/9742, TCP/9800-11000), and security standards for the Gateway.

GW400 Indicator Guide

Normal Operation

Describes the indicator lights for normal operation of the Wireless Gateway and Extended Range.

No Power Status

Indicates the state where all indicator lights are off, signifying no power to the device.

No IP Address Status

Details the status when the LINK light blinks fast and no other lights are on, indicating no IP address.

No Internet Connection Status

Explains the condition where only the LAN light is on, meaning no internet connection.

Web App Setup and Login

Go Online and Access Website

Open a web browser and navigate to www.pelicanwireless.com to begin the setup process.

Create New Web App

Follow the Site Wizard to create a new Pelican Web App, providing details like Site Name and Administrator Email.

Email and First Login

Receive setup email, use temporary password for first login to the Pelican Web App.

Set Permanent Password

Create a new permanent password for secure access to your Pelican Web App.

Forgot Password Procedure

Instructions on how to reset your password using the 'Forgot Password' option.