Mounting examples are shown below are for reference. Additional examples can be found at
www.pelicanwireless.com.
Wireless Module
Inside HVAC
unit
Supply Air
Temperature
Probe
Return Air
Temperature
Probe
Outside HVAC
unit
Z8
Static Pressure
Sensor
Fig. 2 – Typical mounting at HVAC unit.
Fig. 3 – Typical single duct system with bypass and economizer.
WARNING
If installing the Wireless Module outside, make sure it is installed onto a PLASTIC
electrical box. Make sure a proper seal is created between the Wireless Module, the
provided gasket, and the contact edge of the plastic electrical box.
BLOWER MOTOR
BYPASS DAMPER
RETURN DUCT
OUTSIDE AIR DAMPER
AIRFLOW
SUPPLY DUCT
WIRELESS ANTENNA
OUTSIDE AIR PROBE
RETURN AIR PROBE
SUPPLY AIR PROBE
DUCT STATIC PROBE
AIRFLOW
Economizer
Damper Motor
INSIDE AIR HANDLER
AC COIL
AC COIL
HEAT
HEAT
OUTSIDE AIR HANDLER
7
To Next Page
