Pelonis HF-0063 - Cleaning, Specifications, and Support; Cleaning and Storage Guidelines; Technical Specifications and Service

CLEANING AND STORAGE
We recommend that the heater be cleaned at least once a month and before off-season
storage.
Turn the heater OFF and unplug it. Allow it to cool.
Use a dry cloth to clean the external surfaces of the heater.
DO NOT USE WATER, WAX, POLISH OR ANY CHEMICAL SOLUTION.
Clean your heater using the above-mentioned steps, then pack the heater in its original
container and store it in a cool dry place.
This heater does not disassemble.
The motor is factory lubricated for life, and will require no further lubrication.
SPECIFICATIONS
Model NO. HF-0063
Voltage 120V
Frequency 60Hz
Output Power (W) 1500W
Electric Current (A) 12.5A
SERVICE & SUPPORT
DATE OF PURCHASE:
_____________________________________________________________
PLACE OF PURCHASE:
____________________________________________________________
(STAPLE SALES RECEIPT HERE)
NOTE: PROOF OF PURCHASE IS REQUIRED FOR
ALL WARRANTY CLAIMS
In the event of a warranty claim or if service is required for this heater, please contact us at the
following:
Tel: 866 646 4332
Email us at: customerservice@supportuscenter.com
For questions or comments, please write to:
Midea America Corporation
Customer Care Center
11411 NW 107th Street, Suite 12
Miami, FL 33178
For your records, staple your sales receipt to this manual and record the following:
5