To Next Page
T
Travis RobertsJul 30, 2025
What to do if my Pelonis NY1507-14A Heater is not hot enough?
- SStephen DeanJul 30, 2025
If your Pelonis Heater isn't heating the room sufficiently, several factors could be at play. First, ensure the heater is properly plugged into a working electrical outlet. Check that the set temperature is higher than the current room temperature. Also, verify that the thermostat is set to your desired temperature. If a safety device was activated due to overheating, place the heater upright, remove any obstructions, unplug it, wait 10 minutes, then restart it. Other causes might be that the room is too large (in that case, turn on the main heat source), a window is open (close it), the set temperature is too low (increase it), or the power setting is too low (select a higher setting).
General
