20
21
|
USING THE TREAD
USING THE TREAD
WARNING
:
Do not start the Tread before stepping onto the running surface.
Step onto the Tread from the rear, using handrails for balance. Avoid putting your
full weight on the handrails.
CENTER BUTTON
y When the running surface is in motion, press to stop.
y When the Tread is powered on, but inactive, press to wake.
y When the Tread is active, press and hold for three seconds to sleep.
SPEED
y Turn the speed knob forward to increase speed in increments of 0.1 mph.
y Turn the knob backward to decrease speed in increments of 0.1 mph.
y Press the jump button at the center of the knob to increase speed to the next whole mph.
y Tap Speed to change your speed using on-screen shortcuts. Tap the screen and select
Customize Shortcuts to put in your own shortcut speeds.
INCLINE
y Turn the incline knob forward to increase incline in increments of 0.5 percent grade.
y Turn the knob backward to decrease incline in increments of 0.5 percent grade.
y Press the jump button at the center of the knob to increase incline speed to the next
whole percent grade.
y Tap Incline to change your incline using on-screen shortcuts. Tap the screen and select
Customize Shortcuts to put in your own shortcut incline settings.
CAUTION
:
The Tread will only function when the safety key is present and fully
engaged. Do not lose the safety key
SAFETY KEY
Familiarize yourself with emergency stop procedures before using the Tread.
y Detach the magnetized clip from the center rail and clip it to a tight-tting
piece of clothing.
y Detach the safety key to stop the belt immediately and disable the Tread.
y To start running again, reattach the safety key and press the center button.
y Always detach the safety key when the Tread is not in use.
SETTING UP YOUR TREAD CONTINUED
To Next Page
Loading...
