Why does my Pembrook Paper Shredder not start?
If your Pembrook Paper Shredder doesn't start, it's likely due to the safety switch being activated. Ensure that the main unit is correctly positioned on the base unit. Also, verify that the paper/credit card waste bin is fully inserted into the base unit until you hear a click.
What to do if my Pembrook PBS 14-17 has a paper jam?
If a paper jam occurs in your Pembrook Paper Shredder, it might be because too many sheets were fed into the shredder at once. To resolve this, set the slide switch to the REV position to clear the jam.
Why does my Pembrook PBS 14-17 keep turning off?
If your Pembrook Paper Shredder switches off during operation, the shredder might be overloaded. To fix this, switch the paper shredder off and unplug the power cord. Allow it to cool down to room temperature before using it again.
What to do if my Pembrook PBS 14-17 Paper Shredder won't start when I insert paper?
If your Pembrook Paper Shredder doesn't start when you feed in paper, it could be due to a couple of reasons: * The paper may have been inserted at an oblique angle, preventing the detection sensor from activating. Correctly insert the paper into the feed slot. * The paper might be too thin, soft, or creased to reliably activate the detection sensor. Set the slide switch to REV and pull the paper out. Fold the paper and try feeding it again.
General| Brand | Pembrook |
|---|---|
| Model | PBS 14-17 |
| Category | Paper Shredder |
| Language | English |
To Next Page