PendoTECH PressureMAT PMAT3P User Manual

PressureMAT™
System User Guide
Revision 8
www.pendotech.com

PendoTECH PressureMAT PMAT3P Specifications

General

Model	PMAT3P
Type	Pressure Monitor
Power Supply	12-24 VDC
Process Connection	1/4" NPT Male
IP Rating	IP65
Measurement Range	0-100 psi (0-6.9 bar)
Accuracy	±0.25% of full scale
Output	4-20 mA
Connection Type	1/4" NPT Male
Wetted Materials	316L Stainless Steel
Resolution	0.01 psi
Operating Temperature	-20°C to 85°C (-4°F to 185°F)
Material	316L Stainless Steel

Summary

1. Overview of PendoTECH PressureMAT

1.1. PressureMAT Instrument

Details the PressureMAT unit, its components, and available options.

1.2. Instrument Details

Describes the instrument's user interface, functionality, and available models.

2. Setup and Use of the System

2.1. System Setup*

Outlines the steps for connecting sensors, power, and initial system setup.

2.2. Using the System*

Explains how to set alarm points, understand alarm states, and basic operation.

3. Flow Meter Function in PressureMAT-PLUS (2P, 3P & 2F)

3.4. Navigation in the Flow Meter Input Channel

4. Analog Input Function in PressureMAT-PLUS (2P, 3A & 2A only)

4.4. Navigation in the Analog Input Channel

5. Cable Information

APPENDIX C: PressureMAT Data Acquisition Software

Setup View

Explains how to configure the software for data acquisition and model selection.

Trends View

APPENDIX F: Pinch Valve Box Accessory (PDKT-PVE)

APPENDIX G: Using the PressureMAT with WinWedge Software

Instructions

Step-by-step guide for using WinWedge software with the PressureMAT for data collection.

APPENDIX H: PressureMAT Smoothing Function (PV Filter)

PV Filter Functionality