Pendulum TWO User Manual

Assembly instructions
Montageanweisungen

Pendulum TWO Specifications

General

Brand	Pendulum
Model	TWO
Category	Door locks
Language	English

Summary

Assembly Instructions

Step 1: Remove Existing Door Handles

Remove existing door handles and spindle from both sides of the door.

Step 2: Prepare Fixing Plate

Peel the top layer of double-sided tape from the fixing plate without removing the spindle.

Step 3: Position Door Handle

Place the door handle horizontally and press firmly into position.

Step 4: Remove Set Screw

Use an Allen key (#2) to remove the set screw at the bottom.

Step 5: Detach Door Handle Assembly

Pull down the entire door handle assembly to detach it from the fixing plate.

Step 6: Secure Inner Handle

Reassemble the inner handle using existing or new screws as per door type.

Step 7: Set Spindle Function

Decide and adjust the spindle position for the desired handle function (push or pull).

Step 8: Reassemble Handle

Reassemble the door handle, pressing the button until it contacts the fixing plate.

Step 9: Finalize Installation

Rotate handle 10 degrees, slide, return to horizontal, and tighten set screw.