To Next PageTo Next Page
Need help?Do you have a question about the Penguin 43226 and is the answer not in the manual?
Essential reading before assembly, part verification, and team requirements.
Lists tools and materials not included in the kit for proper installation.
Connect main beams (A, B, C, D) with center and corner plates (F, E) using bolts (Pp).
Secure foot plates (H) to each leg (G) using three bolts (Pp).
Lift the assembled frame and attach each leg (G) using four bolts (Pp).
Fit middle joint covers (J) and corner covers (I) at respective points using screws (Qq).
Attach mounting brackets (O, P) to rafters (M, N, N-2) and connect rafters to the central hub (L) and frame.
Place the top cap (K) over the central hub (L) and secure it with washers and acorn nuts (Vv).
Attach flashings (Q, R, S, S-2) to the beam assembly using screws (Qq) for weather protection.
Mount curtain rails (T, U) on the interior of the beam assembly using bolts (Pp).
Slide polycarbonate panels into rafter grooves, ensuring the correct side faces outwards.
Insert middle roof joints, tap panels lightly, and adjust joints for a flush fit.
Slide remaining roof panels into lower rafter grooves and roof joints for a secure fit.
Install edgings and end caps (Gg, Hh) at junctions and corners, secured with bolts (Pp).
Install upper and lower interior crossbars using bolts (Pp), tightening them after all are positioned.
Anchor the gazebo by securing foot plates to the ground with screws (Rr), washers (Tt), and optional lag shields (Ss).
Install screen curtains (Ww) and privacy curtains (Xx) onto the curtain rails.
Ensure all fasteners are tight and consider additional cable guides for windy conditions.
Recommendations for product upkeep, cleaning, and preventing damage from weather or misuse.
Details the one-year warranty, conditions for claims, and limitations of coverage.
Essential reading before assembly, part verification, and team requirements.
Lists tools and materials not included in the kit for proper installation.
Connect main beams (A, B, C, D) with center and corner plates (F, E) using bolts (Pp).
Secure foot plates (H) to each leg (G) using three bolts (Pp).
Lift the assembled frame and attach each leg (G) using four bolts (Pp).
Fit middle joint covers (J) and corner covers (I) at respective points using screws (Qq).
Attach mounting brackets (O, P) to rafters (M, N, N-2) and connect rafters to the central hub (L) and frame.
Place the top cap (K) over the central hub (L) and secure it with washers and acorn nuts (Vv).
Attach flashings (Q, R, S, S-2) to the beam assembly using screws (Qq) for weather protection.
Mount curtain rails (T, U) on the interior of the beam assembly using bolts (Pp).
Slide polycarbonate panels into rafter grooves, ensuring the correct side faces outwards.
Insert middle roof joints, tap panels lightly, and adjust joints for a flush fit.
Slide remaining roof panels into lower rafter grooves and roof joints for a secure fit.
Install edgings and end caps (Gg, Hh) at junctions and corners, secured with bolts (Pp).
Install upper and lower interior crossbars using bolts (Pp), tightening them after all are positioned.
Anchor the gazebo by securing foot plates to the ground with screws (Rr), washers (Tt), and optional lag shields (Ss).
Install screen curtains (Ww) and privacy curtains (Xx) onto the curtain rails.
Ensure all fasteners are tight and consider additional cable guides for windy conditions.
Recommendations for product upkeep, cleaning, and preventing damage from weather or misuse.
Details the one-year warranty, conditions for claims, and limitations of coverage.
General| Brand | Penguin |
|---|---|
| Model | 43226 |
| Category | Outdoor Furnishing |
| Language | English |
