Penguin FLORENCE - Page 44

44
STEP #1
D-3
"Top View"
B-3
A-3 1/2
E-3
E-3
E-3
E-3
E-3
E-3
1.1 Decide the position of the door frames before assembly according to where you intend to
slide the door. At the front of the solarium, use frame (D-3) for the opening of the door and Frame
Next to Door B-3 for the direction of the door when open.
1.2 Align the Sliding Door Frame (D-3) with the Frame Next To Door (B-3), use the Connecting
Piece (E-3) to insert the Sliding Door Frame (D-3) and the inside of the Frame Next to Door (B-3),
connect the outside in the same way. Then align the Door (B-3) with the Frame Next To Door
(A-3 1/2), use the Connecting Piece (E-3) to insert the Frame Next to Door (B-3) and the inside of
the door (A-3 1/2), connect the outside in the same way.
NOTE:
When sliding the Connectors (E-3), shake the frame so that they will slide easily. Do not use tools
to force. If needed, clean the paint with a file and make sure the ends of the frame and joints are
not bent or warped. If so, use the needle-nosed pliers to straighten.
E-3