Penn Scale CM-101 User Manual

PENN SCALE
CM-101 Price Computing Scale
Penn Scale Mfg. Co., Inc.
150 W. Berks Street
Philadelphia, PA 19122
Phone: (215) 739-9644
Fax: (215) 739-9640
Specification
Model
CM - 101
Capacity
30.00 x 0.01 lb / 15.000 x 0.005 kg
Display
LCD ( 5 / 5 / 6 )
Op. Temp.
0 C ~ 35 C / 32 F ~ 95 F
Dimension
Platter
300 x 250 mm / 11.8 x 9.8 “
Height
110 mm / 4.3 “
Length
335 mm / 13.1 “
Width
320 mm / 12.5 “
Power
DC
4 V / 4 Ah Rechargeable Battery
AC
120 V 50 / 60 Hz
Connecter
Standard AC power connecter
Charge Life
120 hrs
Calibration Procedure
( Authorized License Dealer only )
Step 1. Turn the scale Power ON
Step 2. While the scale is in Testing Mode,
press TARE key
Step 3. Enter PASS-WORD
Step 4. When the scale displays
“ c a l , f 1 “, press TARE key
Step 5. When the scale displays “ Uload”,
press TARE key with nothing on
the platter,
Step 6. When the scale displays “ load “ ,
place 30 lb weight on the Platter,
then press TARE
the scale will display “span pass”
< Note >
This procedure must be performed ONLY by the
authorized licensed personnel
If done by other, the field inspector from W & M
may NULLIFY the validity of the scale
Legal for Trade
Certificate #04-101A1
Method to check the voltage condition
Method 1:
After the self-checking when you switch on the scale, the
price window will display: DC *.** (the voltage now)
Method 2:
During the process of usage, you can press the * key
and 00 key meanwhile, then the price window will
display: DC *.** (the voltage now),then you can press
any key to be back to the normal weighing condition.

Penn Scale CM-101 Specifications

General

Capacity	100 lbs
Platform Size	12 x 12 inches
Calibration	External
Power Source	AC Adapter
Units of Measurement	kg, g

Summary

Specifications

Method to check the voltage condition

Method 1

Check voltage by switching on the scale; price window will display DC ***.

Method 2

Check voltage by pressing * and 00 keys; price window will display DC ***.

Calibration Procedure

Operating the Scale

Weighing Operation

Weighing with known TARE

Procedure for weighing items where the container's weight (tare) is known beforehand.

Weighing with Unknown TARE

Procedure for weighing items where the container's weight (tare) must be determined.

Lamp & Keypad

One Year Warranty