To Next PageTo Next Page
Need help?Do you have a question about the Penta KB Power Penta-Drive KBPW-240D and is the answer not in the manual?
Covers electrical hazards, operational risks, and general precautions for installation and operation.
Details safety circuit limitations and installer responsibilities for PWM controls.
Notes compliance with CE directives and required filters/cables.
Describes the PWM control for PM and Shunt Wound motors, features, and specifications.
Guides on connecting AC line, PM motor armature, and Shunt Wound motor fields.
Explains motor current settings, trimpot functions, diagnostic LEDs, and start/stop switch.
Specific instructions for power input, grounding, and PM motor armature connections.
Details for connecting shunt wound motor fields and remote potentiometers/switches.
Instructions for connecting signal inputs like Run Relay and Voltage Following.
Guidance on connecting Inhibit, Enable, and DC Tach-Generator signals.
Details on setting jumpers J1 for motor voltage and J2 for motor current.
Instructions for setting jumpers J3 (Current Limit) and J4 (Tach-Generator).
Configuration of jumpers J5 (Run Relay), J6 (Stop Switch), and J7 (Enable).
Adjusting ACCEL, DECEL, MAX, and MIN speed settings.
Fine-tuning JOG speed, Current Limit, Timed Current Limit, and IR Compensation.
Describes the meaning of the ON, STOP, and OL LEDs.
General| Brand | Penta KB Power |
|---|---|
| Model | Penta-Drive KBPW-240D |
| Category | DC Drives |
| Language | English |
