PENTA Premium Stringer 8600

Need help?

Do you have a question about the PENTA Premium Stringer 8600 and is the answer not in the manual?

Summary

Anatomy of the Stringing Machine

Machine Body and Tension Head Assembly

The main structural components including the body and the tension head.

Tension Mechanism

Components responsible for applying and holding string tension.

String Gripper and Controls

Machine Assembly Steps

Step 1: Adjust Machine Height

Step 4: Position Tension Head

Mounting the Racquet Frame

Adjust and Position Supports

Align and Engage Supports

Tighten Vertical Supports

Stringing Instructions

Starting Position

Setting String Tension

Set the desired tension by turning the tension setting knob.

Pulling the Strings

Rotate the tension head handle backward to pull the string until it locks.

Releasing the Strings

Calibration Procedure

Initial Calibration Setup

Set tension scale to 60 lbs and collar to 0, attach string to calibrator.

Tension Adjustment

Adjust screw B based on calibrator reading to match desired tension.