What to do if Pentair Pool Products IntelliBrite 5g is not working?
If your Pentair Pool Products Landscape Lighting is not illuminating, start by checking the ground fault wiring and reset it if needed. Next, inspect the light wiring connection at both the poolside junction box and the AC power switch. Ensure that the light is receiving the correct AC power.
General| Brand | Pentair Pool Products |
|---|---|
| Model | IntelliBrite 5g |
| Category | Landscape Lighting |
| Language | English |
Crucial safety advice for installers, including code compliance and proper wiring practices.
Highlights the danger of electric shock and the necessity of specific installation methods.
Warns about salt's corrosive effect on pool equipment and surfaces, advising professional consultation.
Describes the choice between "wide" or "narrow" angle light beams for different pool sizes.
Lists the available voltages for IntelliBrite 5g pool LED lights (120 VAC and 12 VAC).
Provides recommendations for using a 300 Watt transformer with multiple 12 VAC IntelliBrite lights.
Explains how to select light show modes or fixed colors by cycling the wall switch on/off.
Introduces the optional IntelliBrite Controller for managing lights and creating effects.
Details how to save the current color mode or fixed color for the light.
Explains the "Hold" feature to capture effects and "Recall" to activate saved effects.
Describes the light's initial white illumination and subsequent color display upon powering on.
Provides tips for resolving common problems like the light not illuminating or functioning.
Outlines the installation steps for the IntelliBrite 5g fixture in a new pool after electrical prep.
Describes the process of replacing the light fixture in an existing pool after electrical checks.
Details the steps for replacing the LED circuit board within an existing pool light assembly.
Continues the procedure for replacing the light assembly in an existing pool, focusing on disassembly.
Guides the installation of the LED light assembly with a new gasket, including circuit board connection.
To Next Page