Need help?Do you have a question about the Pentair Pool Products IntelliComm II and is the answer not in the manual?
General| Brand | Pentair Pool Products |
|---|---|
| Model | IntelliComm II |
| Category | Adapter |
| Language | English |
Specifies the flow rate range for IntelliFlo VF pump control.
Specifies the speed range for IntelliFlo VS+SVRS and IntelliPro pumps.
Instructions for connecting the IntelliComm II to program input terminals.
Connecting the IntelliComm II to a valve actuator.
Guide for supplying power to the IntelliComm II adapter.
Specifics on AC power connection for IntelliFlo pumps.
How to connect Salt Chlorine Generator units.
Detailed steps for connecting the IntelliFlo pump via RS-485.
Lists Compool models compatible with the IntelliComm II adapter.
Lists Compool models requiring an external power adapter.
Guidance on accessing the Compool control system circuit board.
Steps for powering IntelliComm II from a CP3xxx board.
Instructions for using RYALX harness for Compool SOLAR system.
Specific power connection steps for the LX100 board.
Guidance on accessing the Jandy control system circuit board.
Connecting power to IntelliComm II from the Jandy board.
Connecting auxiliary cables to Jandy system for pump control.
Guidance on accessing the Hayward Pro Logic circuit board.
Connecting power to IntelliComm II from the Hayward board.
Connecting auxiliary cables to Hayward system for pump control.
Connecting power to IntelliComm II from the Polaris circuit board.
Guidance on accessing the Polaris EOS control system circuit board.
Connecting auxiliary cables to Polaris system for pump control.
How to program specific flow rates for IntelliFlo VF pumps.
Programming setup for IntelliFlo VS+SVRS pumps.
Understanding pump warnings and alarm conditions indicated by LEDs.
Instructions for mounting the adapter on a flat surface.
Steps to drill holes for mounting the adapter's back cover.
Final steps to install the circuit board and front cover.
To Next Page