Pentair Pool Products QuickTouch II User Manual

QuickTouch
®
II Wireless Remote Installation and User’s Guide
1
IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Installation and User’s Guide
QuickTouch
®
II
Wireless Remote
(For EasyTouch
®
, IntelliTouch
®
SunTouch
®
and
Compool
®
CP3800 Series Control Systems)
PRELIMINARY

Pentair Pool Products QuickTouch II Specifications

General

Brand	Pentair Pool Products
Model	QuickTouch II
Category	Remote Control
Language	English

Summary

WARNING AND IMPORTANT SAFETY INSTRUCTIONS

Important Notice for Installers

Provides essential information for installers regarding the installation, operation, and safe use of the underwater pool and spa light.

Important Battery Information

Operating QuickTouch II Wireless Remote

QuickTouch II in 'Learn' Mode

Connecting QuickTouch II

ID Programming Mode

Instructions on entering the ID programming mode and setting the 8-bit identification number for the remote.

WIRING THE QUICKTOUCH II TRANSCEIVER TO THE LOAD CENTER

Safety Precautions for Wiring

Critical safety warnings about disconnecting power and performing electrical installations by qualified personnel.

Connecting to Load Center

Step-by-step instructions for wiring the transceiver cable to the main circuit breaker and control panel.

Installing the Receiver

Receiver Mounting Procedure

Steps for removing the receiver from its back plate, mounting the back plate, and re-installing the circuit board.

Connecting Receiver Wires

Setting up QuickTouch II Wireless Remote (EasyTouch)

Assigning Spa-Side Remote Buttons

Guide to assigning specific circuits to remote buttons via the EasyTouch control panel menu.

Setting Pump Speed or Flow Rate

COMPOOL SS8 REMOTE UPGRADE INSTALLATION

Connecting Spa-Side Remote to CP3xxx Load Center

Changing the Battery

Replacing the Battery