Pentair INVERTEMP FL - Page 3

OUT
23
28
17
33
42
49
R32 static °C / bar
56
62
67
10
0
-9
-20
72
10 bar = 1 MPa = 145 psi
Classe 1.6
5
10
15
20
35
45
55
30
50
0 Bar
60
25
40
°C
IVTP-1M-FLInverTemp™-FL 1M
S/N 1234ABCD1234ABCD1234ABCD01
QC Passed
Pentair International Sarl
Avenue de Sévelin 18
CH-1004 Lausanne
Mfg Year
Nov-2019
MADE IN CHINA
SCAN
ME
230V 50Hz~ / IPX4 / 2400 W
IN

5,4 kW 6,6 kW 7,8 kW 9,8 kW 11,5 kW 14,6 kW
4,5 - 4,8 4,4 - 4,9 4,9 - 5,2 4,5 - 5 4,2 - 4,6 4,3 - 4,6
2,6 - 5,4 kW 3,2 - 6,6 kW 3,5 - 7,5 kW 3,7 - 9,8 kW 4,2 - 11,5 kW 4,9 - 14,6 kW
4,5 - 6,7 4,4 - 6,7 4,9 - 6,7 4,5 - 7,0 4,2 - 6,7 4,3 - 6,6
2,6 - 2,9 kW 3,2 - 3,8 kW 3,5 - 4,9 kW 3,7 - 7,8 kW 4,2 - 6,7 kW 4,9 - 8,5 kW
5,6 - 6,7 5,6 - 6,7 6,1 - 7,1 5,5 - 7,0 5,7 - 6,7 5,6 - 6,6
2,75 kW 3,35 kW 4,65 kW 5,45 kW 5,8 kW 8,3 kW
2,86 2,82 3,96 3,64 2,83
3
22-32 dB(a) 24-33 dB(a) 27-34 dB(a) 28-39 dB(a)28-39 dB(a) 29-40 dB(a)
1,5" / 50 mm
230V / 1  +N / 50 Hz
C 10 A C 10 A C 10 A C 16 A C 20 A C 20 A
3G 2,5 mm² 3G 2,5 mm² 3G 2,5 mm² 3G
2,5 mm² 3G 4 mm² 3G 4 mm²
4 m³/h 5 m³/h 6 m³/h
40 kg 40 kg 46 kg 46 kg 57.5 kg 65.5 kg
Modèle
6,8 kW 8,8 kW 10,6 kW 12,8 kW 16,5 kW 20,1 kW
5,9 - 6,5 5,5 - 6,5 5,4 - 6,8 5,6 - 6,8
5,1 - 6
5,2 - 5,9
3,2 - 6,8 kW 3,5 - 8,8 kW 3,9 - 10,6 kW 4,2 - 12,8 kW 5,5 - 16,5 kW 6,5 - 20,1 kW
5,9 - 10,8 5,5 - 10,8 5,4 - 10,8 5,6 - 11,2 5,1 - 10,8 5,2 - 10,1
3,2 - 5,8 kW 3,5 - 5,8 kW 3,9 - 7,1 kW 4,2 - 8,4 kW 5,5 - 9,9 kW 6,5 - 12,2 kW
8,3 - 10,8 8,3 - 10,8 8,3 - 10,8 8,5 - 11,2 8,3 - 10,8 8,1 - 10,1
IVTP-1M-FL IVTP-2M-FL IVTP-3M-FL IVTP-4M-FL
IVTP-5M-FL
IVTP-6M-FL
32
DELIVERY TRANSPORT
GENERAL DESCRIPTION
TABLE OF CHARACTERISTICS
Conditions Dry air temperature: 28°C - Relative humidity: 80% - Input water temperature: 28°C
Heating capacity
(boost Mode)
Continuous power (COP)
(boost Mode)
Heating capacity
(Smart mode)
Continuous power (COP)
(Smart mode)
Heating capacity
(Eco mode)
Continuous power (COP)
(Eco mode)
Conditions Dry air temperature: 15°C - Relative humidity: 70% - Input water temperature: 28°C
Heating capacity
(boost Mode)
Continuous power (COP)
(boost Mode)
Heating capacity
(Smart mode)
Continuous power (COP)
(Smart mode)
Heating capacity
(Eco mode)
Continuous power (COP)
(Eco mode)
Conditions
Dry air temperature: 7°C - Relative humidity: 0% - Input water temperature: 26°C
Heating capacity
Continuous power (COP)
Sound pressure at 10m
Compressor Mitsubishi / Toshiba 2D Full DC Inverter
Expansion valve Electronic
Cabinet Painted sheet metal - Reinforced ABS, UV protection and equipped with soundproof panels
Refrigerant Recyclable refrigerant with no impact on the ozone layer (R32)
Hydraulic connection
Supply voltage
Fuse rating
Power supply cross section
Minimum water ow
Weight
When you have unpacked the HP, please check the content to report any damage. Please also check that the pressure reading on the pressure gauge is equal
to the pressure mentioned on the box, depending on the measured outdoor temperature, as different values might indicate a leak.
The HP should always be stored and transported in a vertical position, on a pallet and inside its original packaging.
Transporting and/or storing the HP horizontally will void the guarantee.
Rear protective grid of the evaporatorManufacturer’s plate
Pressure gauge
Control screen
Water inlet Hot water outlet Condensate evacuation
Installation pads
(under hoods)
Fan air outlet
230V AC electric
supply inlet
RS485 cable passage
(option)
Side protective grids
of the evaporator
Model