EasyManua.ls Logo

Pentair PRO-SOURCE PS19T-T02 User Manual

Pentair PRO-SOURCE PS19T-T02
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
®
OWNER’S MANUAL
Steel Pressure Tanks
MANUAL D’UTILISATION
Réservoirs sous
pression en acier
MANUAL DEL PROPIETARIO
Tanques de
presión de acero
© 2014 Pentair Ltd. All Rights Reserved.
293 WRIGHT STREET, DELAVAN, WI 53115 WWW.PUMPS.COM
PH: 8887827483
PS975 (02/20/14)
4108 1101 ASB PROS
Installation/Operation/Parts
For further operating,
installation, or maintenance
assistance:
Call 1-888-782-7483
English .................. Pages 2-10
Installation/Fonctionnement
/Pièces
Pour plus de renseignements
concernant l’utilisation,
l’installation ou l’entretien,
Composer le
1 (888)
782-7483
Français ............. Pages 11-19
Instalación/Operación/Piezas
Para mayor información sobre
el funcionamiento, instalación o
mantenimiento de la bomba:
Llame al 1-888-
782-7483
Español .............Paginas 20-28
3936 0401
Question and Answer IconNeed help?

Do you have a question about the Pentair PRO-SOURCE PS19T-T02 and is the answer not in the manual?

Pentair PRO-SOURCE PS19T-T02 Specifications

General IconGeneral
BrandPentair
ModelPRO-SOURCE PS19T-T02
CategoryWater Heater
LanguageEnglish

Summary

Safety

Safety Alert Symbol and Instructions

Explains the safety alert symbol and signal words for injury prevention.

Safe Installation and Operation Rules

Guidelines for safe installation and operation to prevent injury or damage.

General Information

Tank Pre-charge Settings

How to set pre-charge pressure to 2 PSI below pump cut-in.

Operating Cycle Explanation

Describes the sequence of tank operation from empty to full.

Installation

Checking Tank Air Charge

Steps to verify and adjust tank air pressure using a gauge.

Checking Pump Pressure Switch

Procedure to test the pump's pressure switch cut-in setting.

Water Cell Leakage Testing

Method to detect leaks within the tank's water cell.

Water Cell Replacement

Steps for removing and replacing the tank's water cell.

Air Valve Replacement (PS Models)

Procedure for replacing the air valve on PS series tanks.

Air Valve Replacement (PSP Models)

Procedure for replacing the air valve on PSP series tanks.

Installation and Warranty

Piping Connections Guide

Diagrams and notes for connecting the tank to the pump system.

Limited Warranty Information

Details on product warranty coverage, periods, and terms.

Related product manuals